Construction Products · United Kingdom

Identify the market and product category first. Each dossier separates legal duties, referenced standards, evidence and the comparison needed for an award.

Regulatory Basis

GB · GB product-specific legislation; General Product Safety Regulations 2005; NI EU rules

Great Britain and Northern Ireland: product rules and marking

Great Britain means England, Scotland and Wales; Northern Ireland is a separate product-regulatory jurisdiction. For a consumer product, first identify sector legislation and residual general-safety duties. UKCA, CE and UKNI are different routes, not alternative designs for the same award badge.

Learn more

GB · UK REACH; GB CLP; Northern Ireland EU REACH/CLP

UK REACH restrictions and GB chemical classification

Articles, substances and mixtures trigger different requirements. Identify GB or NI, actual chemical identity, material, contact scenario and professional/consumer use. Finished textiles, footwear and plastics often require restriction screening, while paints and adhesives can additionally require mixture classification and labels.

Learn more

GB · GB Construction Products Regulation 2011 and amendments

Construction products in Great Britain

Construction products within the applicable designated-standard or technical-assessment route, defined by intended incorporation and product family. Building use and installation requirements vary within the UK and are not established solely by a product’s marking.

Learn more

GB · Regulation 31 approval; Water Fittings Regulations and devolved equivalents

Drinking-water products: public supply and building fittings

Public water-supply products and building water fittings have different approval and installation questions. Regulation 31 concerns water-company use; domestic taps and fittings require assessment under the relevant water-fittings regime, with Scotland, Wales and NI legal differences considered.

Learn more

Applicability depends on the product classification, intended use, configuration and actual sales territory. Manufacturing, placing-on-the-market and testing dates, together with transition provisions, are checked as required by each applicable rule. The directory identifies sources; it does not replace assessment of the specific model. Standards are identified by reference, and their authoritative texts remain with the issuing bodies. Official source documents retain their original language.